1 / 6
Promethean Air Cleaner for FDM and MSLA (resin) — zdjęcie 1
1 / 6

Promethean Air Cleaner for FDM and MSLA (resin)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This air cleaner is designed for FDM & Resin, uses a reusable carbon cartridge, and is available as DIY or Assembled.

Ocena
5 / 5
Polubienia
32
Pobrania
191
Wydruki
1
Wyświetlenia
1507
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Highlights:

  • MERV 13 filter maintains a good airflow rate while capturing the majority of particulates.
  • HEPA 13 is available for extraction applications.
  • Reusable cartridge uses low-dust coconut-shell activated carbon.
  • Can be used as a typical air cleaner or a fume extractor (from a grow tent or other enclosure).
  • Compatible with other 120 mm fans and 6 inch (150mm) filters.

 

We recommend downloading the zip file to get an organized directory.

Visit https://4dfiltration.com/resources/promethean-guide.html for the entire build guide and a component selection table.

 

 

This unit is in no way a replacement for proper ventilation that is HIGHLY recommended in any resin setup - it is supplemental to a setup by assisting to contain 'fumes' at the source.

This air cleaner pulls air through a MERV 13 filter and activated carbon granules. The MERV 13 filter is ideal for capturing nanoplastics generated from FDM printers. The activated carbon mitigates fumes from FDM and resin printers - place emphasis on mitigation since carbon typically has efficiencies of 40-60%. 

The Promethean files are released for non-commercial use (don't make and sell these) and a sourcing & build guide is provided below. If you wish to purchase a pre-assembled version or pick up some of the components, head over to our Shop.

Tagi