German Langes Messer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The German Long Knife as a full-sized prop!
- Ocena
- 0 / 5
- Polubienia
- 34
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 1047
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I've always loved the German Messer Sword design, and decided to model my own Langes Messer (Long Knife).
I tried to keep the construction simple, but somewhat close to how a real Messer is assembled.
----------------------------
Printing:
I like my props to be fairly sturdy, so I suggest printing with 3+ perimeters and around 25%+ infill. Other than that, anything goes.
The pieces should fit relatively snugly together, so a small amount of sanding may be necessary if your printer calibration is a smidge off. A little Superglue will also be necessary if you want to really hold everything tightly.
Assembly should be very straight-forward. I like to assembled the blade and grip separately, then fit them both together at the end.