YG300 Projector Lens Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Lens Cap for the cheap YG300 Projector found on Chinese eCommerce sites. It is held in place with a rubber…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
This is a Lens Cap for the cheap YG300 Projector found on Chinese eCommerce sites. It is held in place with a rubber band (that can also be used to keep the cap on top so you don't loose it while in use. I got mine on Aliexpress (when it was on sale), but I recommend getting it from Banggood or eBay. Mine did not come with a lens cap which sucks for a portable projector, so I made one!
I thought about making a press fit cap, but that might put extra stress on the lens and would wear out fast. I may eventually post a V2 that is press fit, but the rubber band is good enough for now.
I designed this in Onshape. Here is the link to the design.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1-0.3mm
Infill:
5-20%
Notes:
If you have a nozzle 0.5mm or wider the extrusion width might make it fit a bit tight.
Category: Gadgets