YG300 Projector Lens Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Lens Cap for the cheap YG300 Projector found on Chinese eCommerce sites. It is held in place with a rubber…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 301
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
This is a Lens Cap for the cheap YG300 Projector found on Chinese eCommerce sites. It is held in place with a rubber band (that can also be used to keep the cap on top so you don't loose it while in use. I got mine on Aliexpress (when it was on sale), but I recommend getting it from Banggood or eBay. Mine did not come with a lens cap which sucks for a portable projector, so I made one!
I thought about making a press fit cap, but that might put extra stress on the lens and would wear out fast. I may eventually post a V2 that is press fit, but the rubber band is good enough for now.
I designed this in Onshape. Here is the link to the design.
Print Settings
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1-0.3mm
Infill:
5-20%
Notes:
If you have a nozzle 0.5mm or wider the extrusion width might make it fit a bit tight.
Category: Gadgets