Solder/Wire holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder specialy designed for the 250gram stannol spools, but you also could use it as a wire holder.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 446
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A holder specialy designed for the 250gram stannol spools, but you also could use it as a wire holder. It is completely modular, so it is easy to change in the future.
Please use the solder_holder_arm_slide_on_V2.stl the holes are bigger, so the solder will easier go through the slide on part.
TIPS:
If the parts won't slide in with out the use of exesive force, grab a file to make it fit proporly.
Print the arm in suge a way that the layers are perpendicular to the final force.
P.S.
If you build this model yourself please upload a photograph of the end result, in the "post a make" section.