Adjustable, oversized Y-axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Includes a beefed up Y-axis motor clamp, and a heavily reinforced Y-axis idler with adjustment.
- Ocena
- 4,818 / 5
- Polubienia
- 80
- Pobrania
- 633
- Wydruki
- 8
- Wyświetlenia
- 4192
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Includes a beefed up Y-axis motor clamp, and a heavily reinforced Y-axis idler with adjustment.
This a remix of MattyVee's idler from https://www.thingiverse.com/thing:2786671
(though I'm not sure there are any original parts left)
There's also a 10mm wide variant for wider idlers.
Uses a pair of 40mm bolts for the hinge and idler. Other than that, similar to Matty Vee's.
Print the ‘Top’, and a suitable ‘Base’ (10mm for wider idlers), as well as ‘Washers’ if using a twin bearing idler. The washers can be used to stop the side of the idler rubbing on the plastic.