Adjustable, oversized Y-axis
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Includes a beefed up Y-axis motor clamp, and a heavily reinforced Y-axis idler with adjustment.
- Rating
- 4.818 / 5
- Likes
- 80
- Downloads
- 633
- Makes
- 8
- Views
- 4,192
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Includes a beefed up Y-axis motor clamp, and a heavily reinforced Y-axis idler with adjustment.
This a remix of MattyVee's idler from https://www.thingiverse.com/thing:2786671
(though I'm not sure there are any original parts left)
There's also a 10mm wide variant for wider idlers.
Uses a pair of 40mm bolts for the hinge and idler. Other than that, similar to Matty Vee's.
Print the ‘Top’, and a suitable ‘Base’ (10mm for wider idlers), as well as ‘Washers’ if using a twin bearing idler. The washers can be used to stop the side of the idler rubbing on the plastic.