Tightspot Quiver Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A hanger for the tightspot 5 arrow quiver for hunting.
- Ocena
- 4 / 5
- Polubienia
- 14
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 1178
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A hanger for the tightspot 5 arrow quiver for hunting. I just used some spare zing-it rope I had laying around, but paracord or really any other small diameter rope should work.
A rope that way there is less potential for noise with contact on whatever your hanging device is.
It is a “snap fit” onto the quiver. Print in PETG or ASA since this is a part that requires strength and will be exposed to the elements. I just printed with 0.3mm layer height and 10% infill, 2 perimeters.
Not sure if it will fit the other tightspot quivers, it might as long as the carbon rods for the quiver are equal in diameter and equal in distance apart.