Wallplate Bracket / Mount for Caseta by Lutron Pico Remote
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant, and I wanted some…
- Ocena
- 4,833 / 5
- Polubienia
- 68
- Pobrania
- 747
- Wydruki
- 7
- Wyświetlenia
- 2174
- Oceny
- 12
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I've been working on utilizing Pico remotes to control Zigbee lights through Home Assistant, and I wanted some additional wall mounts for the extra Pico remotes that I wanted to install, so I remixed joshcarter's original wall bracket to add the following features:
- Added extra material around the bottom of the remote insert that stabilizes it in the mount
- Added a small bump towards the bottom of the remote that clicks it into place
- The remote insert is now longer and wider to stabilize the remote better in the mount.
- The mount is now wider to keep it from flexing.
I found in my iterations that this version mounted about as well or better than the original Lutron mounts. Thank you to joshcarter for posting the original!
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Resolution:
.15 - I wanted to make sure that the bump to hold in the remote is printed in a high enough resolution as it is only .5mm high.
Notes:
You may want to print this in a color matching your cover plate.
Category: Household