1 / 10
Ender 3 Z1 & Z2 Axis Plate for Dual Motor Z — zdjęcie 1
1 / 10

Ender 3 Z1 & Z2 Axis Plate for Dual Motor Z

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix this to give more strength to the part.

Ocena
0 / 5
Polubienia
9
Pobrania
81
Wydruki
0
Wyświetlenia
1368
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Remix this to give more strength to the part. Thin parts will bend and for small increments the axis will not move, for example z-hop. Rocksolid part now.

Need longer screws and an ajustable motor mount like: https://www.thingiverse.com/thing:3603432

Z1 Plate is the mirrored version of Z2 with clearance for X Motor, it also removes Extruder motor, this is only for Direct Drive or relocated extrusion systems.

Beefy Version:

  • Require 2 backlashes per part
  • 4x or 8x per part m3x4mm OD3.7mm thread inserts

## NOTE:
If you edit z1 ipt you need to mirror the output at X.
From 26/03/2020 i recommend you opt for the beefy version, it will solve all your z problems!
From 16/05/2019 i recommend use only the custom backslash version, much better fit into thread without play, some brass alternatives sucks, this is a much better way. Lube the thread.

# Changelog
26/03/2020: Added a beefy version, 0 backlash and 0 flex, end of Z problems.
16/05/2019: Modify to use custom backslash

Print instructions

4 Perimeters

Backslash:

  • 0.1 layer height
  • 3 perimeters
  • turn off: ensure vertical wall thickness
  • turn on: avoid crossing perimeters
  • Seam: aligned
  • infill: honeycomb, then 20%
  • Filament: cooling on full
  • printer: 0.1 lift Z

Print two backlash per each of beefy version

Tagi