1 / 10
Ender 3 Z1 & Z2 Axis Plate for Dual Motor Z — image 1
1 / 10

Ender 3 Z1 & Z2 Axis Plate for Dual Motor Z

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix this to give more strength to the part.

Rating
0 / 5
Likes
9
Downloads
81
Makes
0
Views
1,368
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

Remix this to give more strength to the part. Thin parts will bend and for small increments the axis will not move, for example z-hop. Rocksolid part now.

Need longer screws and an ajustable motor mount like: https://www.thingiverse.com/thing:3603432

Z1 Plate is the mirrored version of Z2 with clearance for X Motor, it also removes Extruder motor, this is only for Direct Drive or relocated extrusion systems.

Beefy Version:

  • Require 2 backlashes per part
  • 4x or 8x per part m3x4mm OD3.7mm thread inserts

## NOTE:
If you edit z1 ipt you need to mirror the output at X.
From 26/03/2020 i recommend you opt for the beefy version, it will solve all your z problems!
From 16/05/2019 i recommend use only the custom backslash version, much better fit into thread without play, some brass alternatives sucks, this is a much better way. Lube the thread.

# Changelog
26/03/2020: Added a beefy version, 0 backlash and 0 flex, end of Z problems.
16/05/2019: Modify to use custom backslash

Print instructions

4 Perimeters

Backslash:

  • 0.1 layer height
  • 3 perimeters
  • turn off: ensure vertical wall thickness
  • turn on: avoid crossing perimeters
  • Seam: aligned
  • infill: honeycomb, then 20%
  • Filament: cooling on full
  • printer: 0.1 lift Z

Print two backlash per each of beefy version

Tags