Sony Walkman WM-F100 Cheap Battery Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to be used with 14Ga solid strand wire (or whatever is available). No room for capacitor
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1530
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
The printed ones on ebay have gotten quite expensive. This is intended as a cheap (temporary-ish) fix to get your walkman powered quickly. It was printed with no support or brim. 2mm layer height. PLA only so far. - Does not Fit Sony WM-101, or WM-102 Walkman models. (working on those next). WM-F100 is shown on right in all pics.
One thing to note is that without a capacitor wired in parallel, with the battery, the motor spins up slower and playback speed is more directly correlated with battery voltage. (As the battery dies, the tape noticeably slows down - not just at the end but the entire duration of the battery's life.)
Hope this helps someone resurrect an old ebay find like myself