Sony Walkman WM-F100 Cheap Battery Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed to be used with 14Ga solid strand wire (or whatever is available). No room for capacitor
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 194
- Makes
- 0
- Views
- 1,530
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
The printed ones on ebay have gotten quite expensive. This is intended as a cheap (temporary-ish) fix to get your walkman powered quickly. It was printed with no support or brim. 2mm layer height. PLA only so far. - Does not Fit Sony WM-101, or WM-102 Walkman models. (working on those next). WM-F100 is shown on right in all pics.
One thing to note is that without a capacitor wired in parallel, with the battery, the motor spins up slower and playback speed is more directly correlated with battery voltage. (As the battery dies, the tape noticeably slows down - not just at the end but the entire duration of the battery's life.)
Hope this helps someone resurrect an old ebay find like myself