GU10 socket + Wood strips base for moon lamp lithophane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a base remix for frank Deschners designer lithophane moon lamp using a GU10 socket and wood strips
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 980
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Attention! The moon lamp has to be printed at 80%scale to fit this! I did that because it would not fit on my prusa Mini otherwise.
Print it from the provided .3mf, I suggest. Use a standard GU10 Socket, solder the wires to a power cord (I don´t take responsibility if you burn your house down etc.) and hide the wires in the bottom portion. I then secured the socket in the top just with a very small screw in the gap between socket and holder.
For Wood I used Wenge, but you can use anything you want with around 3,5mm thickness. My wooden feet-strips are aroudn 11cm long, and I just shaped them with a handplane to fit in the dovetail in the holder. Glued in with a drop of CA glue.
looks a bit better and more fancy than the original, but I might be biased a bit here.