Pot Lid Holders for Doors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stick to the inside of cabinet doors or on walls and instantly organize your pot lids! But wait, there's more! :-)
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 179
- Wydruki
- 2
- Wyświetlenia
- 808
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Each lid needs two clips - a left and a right. The clips are tapered for better fit. There's two sizes - the difference is the depth. Small (SM) fits most lids. Large (LG) is for thicker lids. Apply 2-sided foam tape to the rear of the holder and use a ruler to gauge distance and make sure they're level. Increase the spacing for larger lids, decrease for smaller. It's like magic…..
I printed these in standard PLA and have no breakage issues. Corners are reinforced. Thin enough where it's all walls, but if you need infll make it 100%.