LED Strip Mount for SuperRacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount I created for my FLSUN SuperRacer for a 100 mm long 24v LED strip. You can use an strip, up to 10 mm…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 277
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a mount I created for my FLSUN SuperRacer for a 100 mm long 24v LED strip. You can use an strip, up to 10 mm wide. I have a print-in-place hinged version (that swings out) and one that's solid. Except for the hinge, both versions are similar.
I mounted it to the frame with a single M3x10mm screw using T-nut M3 drop-in rotating V-Slot by DaVinci2000.
I ran the wire up the v-slot and added a switch to turn them off. I used these covers to hide the wiring: Extrusion V-Slot Covers by Crabiter.
Print Settings
Printer:
FLSUN SuperRacer
Rafts:
No
Supports:
No
Resolution:
.3 mm
Infill:
50%
Filament:
eSun PLA+
Dark Blue
Notes:
3 outer walls for strength.
Category: 3D Printer Parts