1 / 1
Dragonflly BMS hotend spacer for Neptune 2/2S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When installing a Dragonfly BMS on the Neptune 2 or 2S you need to move the hotend a bit further out from the backplate
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
When installing a Dragonfly BMS on the Neptune 2 or 2S you need to move the hotend a bit further out from the backplate as to clear the bottom nut and allow the hotend to be straight. A spacer is needed to intall it properly. This file fits the profile of the dragonfly and will allow the proper spacing for installation. Print with 100% infill.
It is small and does not take long to print.