1 / 1
Dragonflly BMS hotend spacer for Neptune 2/2S
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When installing a Dragonfly BMS on the Neptune 2 or 2S you need to move the hotend a bit further out from the backplate
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 20
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
When installing a Dragonfly BMS on the Neptune 2 or 2S you need to move the hotend a bit further out from the backplate as to clear the bottom nut and allow the hotend to be straight. A spacer is needed to intall it properly. This file fits the profile of the dragonfly and will allow the proper spacing for installation. Print with 100% infill.
It is small and does not take long to print.