Honeycomb Guitar Body
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple honeycomb Stratocaster-based electric guitar body, sliced into pieces for smaller 3D printers.
- Ocena
- 2 / 5
- Polubienia
- 215
- Pobrania
- 929
- Wydruki
- 1
- Wyświetlenia
- 6656
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
This is a Fender Stratocaster-based body with a honeycomb pattern design on one half of the body.
There is the model combined as a whole, but there is also a model of the guitar split into 7 pieces to fit onto print beds, with a channel along each of the slices in the body for some form of adhesive. I plan on combining these prints with friction welding.
This specific model has cutouts for an input jack, pickups, and other electronics in the body. The electronics I used for this was a loaded pick guard that I found online, that had all of the electronics already built into it, then a separate input jack to connect to the rest of the electronics. As for the neck, I bought a relatively inexpensive replacement Strat neck online.
If you're looking for a good tutorial on friction welding, this is the one that I learned from: Finishing and Post-Processing 3D Printed Objects | Make
Note: This model hasn't been fully tested and put together yet