Prusament Screw-Top Container v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are parts that you can use to convert a Prusament spool cardboard core into a container.
- Ocena
- 4,894 / 5
- Polubienia
- 527
- Pobrania
- 1668
- Wydruki
- 137
- Wyświetlenia
- 11 495
- Oceny
- 142
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
These are parts that you can use to convert a Prusament spool cardboard core into a container.
Insert the top and bottom parts from both sides into a spool core. The "teeth" on the parts align with the teeth on the original spool sides. First, try to align the printed parts with the grooves that were left after spool parts. If there is not enough friction to hold the part in place — insert it in a way where the teeth don't align with the grooves.
You can read a story about this design on TerpuhLabs.
The first version that I made was a remix of the CONTAINERS - PRUSAMENT SPOOL - reuse idea by Dominik Císař. I didn't like how the first version performed so I redesigned the project from scratch.
Print instructions
0.2 layer height will work, but smaller layer heights result in better screwing experience.