Whatnot - 3 Level plates / Etažér
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3 plates with different size screwed together making multi floor storage for sweets
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 336
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed this 3 level whatnot for my wedding. Even though I think 3d print is not suitable for food in general, I made exception with this one, where food is only placed on 3d printed plate. You can put baken paper between food and plate if you want to be 100% safe.
There are 3 plates. Bottom plate (d=200 mm), middle plate (d=160mm) and top plate (d=120mm) screwed together with pillars. Everything can be printed without support with standard 0.2 layer height. Printed with PLA but PETG should works too.
Heart shaped top piece is without text :)