(Beta Test) Magnetic MMU Transport Handle for Original Prusa Enclosure Interface
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feed your MMU fast with 5 magnetic connection points conveniently nestled into the transport handle of your enclosure!
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 264
- Wydruki
- 3
- Wyświetlenia
- 2377
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Beta Testing Notice
This model is currently in beta testing.
I printed the manifold in Prusament Jet Black PLA. It had some stringing across the tube holes that required some cleanup with an X-Acto knife. I printed the Modified transport handle in Prusament Prusa orange PLA. The slots for the square nuts are a little bit tight, but they were the same as the original so I assume it isn't prudent for me to enlarge them.
I have not been able to test this end to end because I am still waiting on the magnets to arrive.
I am releasing this model for beta before I complete testing because these parts are remixes of extensively tested parts and I have tested all of the modified portions.
Non-printed Material
- 2 pc. M3n
- 2 pc. M3x8
- 3 pc M3nS
NOTE: Check your spare parts box, you should have this hardware left over from putting the enclosure together.
NOTE: The linked company does not ship outside of Europe and I could not find a US source that produces this size. Anyone outside of Europe has a couple of options:
- Use a reshipper who will receive your package and ship it to you.
- Order the magnets custom. I have provided the specification file in PDF format in “other files” below you can upload the provided document at the bottom of THIS page.
- 5 pc. 4mm OD 2mm ID PTFE tubing ( This is the best deal I could find please comment if you find a better source)
Magnetic Connection Standardization
For the sake of my own sanity, and yours should you choose to adopt this standard. I propose the following standards:
- All connections where the connector is attached to a fixed object (enclosures, dry boxes, etc.) that the magnets all present the NORTH pole for attachment.
- All non-fixed connectors present the SOUTH pole for attachment.
- All PTFE tubes have a magnetic connection at both ends whenever possible.
You can easily determine the polarity of a magnet using a Polarity Detector. Once polarity is determined it can be helpful to use the Polarity Helper to keep track of the polarity while you are working.