Woman empowerment wheel bloc

You need

• 2 colors of PLA filament
• 1 608ZZ ball bearing : https://www.amazon.fr/gp/product/B07S3SZZST/
• 9 magnets ( https://www.amazon.fr/gp/product/B075FL7FVS/ - small size) 2,7mm height - 6mm diameter
• Loctite super glue
• Tape

No support needed, 0.20mm resolution, PLA is fine :)

Pauses and color change

Use the gcode files for Prusa mini : pauses and switch of PLA color are prepared

Otherwise :

• Make a pause a 0,1mm before the end of Wheel.stl to insert the 8 magnets (with glue): be careful to insert them in the same orientation on all the holes, then finish the print
• Make a pause and change PLA color on letters on Wheel - face.stl and Box - face.stl

Assembly

• Glue Wheel - face.stl with Wheel.stl 
• Insert the 608ZZ ball bearing in the assembled wheel
• Glue Box.stl with Box - face.stl
• Insert the wheel in the box
• Glue 1 magnet with Stopper.stl : be careful to glue it in the right direction
• Align 1 word correctly, add a bit of tape so it won't move
• Glue the stopper with the magnet on the back of the Box, alining it with one of the magnet of the wheel
• Print 2 Stand.stl for displaying it on your desk for extra stability, glue them on the box bottom
• Roll the wheel and enjoy !

PS : Trans women are women !

PPS : My no-remix policy for this project can be discussed upon the goal of your project. If you want to create a remix to empower or support a minority of people (= not cis white straight dudes), drop me a message !