1 / 6
Woman empowerment wheel bloc
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because you should never apologize for being a woman
- Rating
- 5 / 5
- Likes
- 156
- Downloads
- 111
- Makes
- 4
- Views
- 1,863
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You need
- 2 colors of PLA filament
- 1 608ZZ ball bearing : https://www.amazon.fr/gp/product/B07S3SZZST/
- 9 magnets ( https://www.amazon.fr/gp/product/B075FL7FVS/ - small size) 2,7mm height - 6mm diameter
- Loctite super glue
- Tape
No support needed, 0.20mm resolution, PLA is fine :)

Pauses and color change
Use the gcode files for Prusa mini : pauses and switch of PLA color are prepared
Otherwise :
- Make a pause a 0,1mm before the end of Wheel.stl to insert the 8 magnets (with glue): be careful to insert them in the same orientation on all the holes, then finish the print
- Make a pause and change PLA color on letters on Wheel - face.stl and Box - face.stl
Assembly
- Glue Wheel - face.stl with Wheel.stl
- Insert the 608ZZ ball bearing in the assembled wheel
- Glue Box.stl with Box - face.stl
- Insert the wheel in the box
- Glue 1 magnet with Stopper.stl : be careful to glue it in the right direction
- Align 1 word correctly, add a bit of tape so it won't move
- Glue the stopper with the magnet on the back of the Box, alining it with one of the magnet of the wheel
- Print 2 Stand.stl for displaying it on your desk for extra stability, glue them on the box bottom
- Roll the wheel and enjoy !
PS : Trans women are women !
PPS : My no-remix policy for this project can be discussed upon the goal of your project. If you want to create a remix to empower or support a minority of people (= not cis white straight dudes), drop me a message !