1 / 3
2KG Filament Spool Holder Mark II — zdjęcie 1
1 / 3

2KG Filament Spool Holder Mark II

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This modification adjusts model dimensions, structure, and uses a new foot attachment.

Ocena
5 / 5
Polubienia
12
Pobrania
130
Wydruki
0
Wyświetlenia
565
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print Settings: These setting apply to the solid, tested, parts, not the flexible feet.

Printer:

Tested with Prusa MK2S+

 

Filament:

PETG or PLA

Tested with PETG.

 

Layer Hight:

0.3

 

Infill:

20%

Grid

 

Exterior Perimeters:

4

 

Brim:

No

 

Heated Bed:

Recommended

 

Supports:

Recommended, but possibly not necessary for the base when printing with PLA. 

 

Approximated Filament Usage:

91.04m. Not including feet.

 

Approximated Print Time:

17 hour. Not including feet.

 

The feet should be printed out a flexible filament of your choice and convenience. This is for the sake of adding friction, but this feature is as of yet untested, so I encourage you to experiment and post makes. P.S. post processing might be necessary to make the feet fit, depending on your flexible filament's shrinkage.

Tagi