1 / 3
2KG Filament Spool Holder Mark II — image 1
1 / 3

2KG Filament Spool Holder Mark II

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This modification adjusts model dimensions, structure, and uses a new foot attachment.

Rating
5 / 5
Likes
12
Downloads
130
Makes
0
Views
565
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Print Settings: These setting apply to the solid, tested, parts, not the flexible feet.

Printer:

Tested with Prusa MK2S+

 

Filament:

PETG or PLA

Tested with PETG.

 

Layer Hight:

0.3

 

Infill:

20%

Grid

 

Exterior Perimeters:

4

 

Brim:

No

 

Heated Bed:

Recommended

 

Supports:

Recommended, but possibly not necessary for the base when printing with PLA. 

 

Approximated Filament Usage:

91.04m. Not including feet.

 

Approximated Print Time:

17 hour. Not including feet.

 

The feet should be printed out a flexible filament of your choice and convenience. This is for the sake of adding friction, but this feature is as of yet untested, so I encourage you to experiment and post makes. P.S. post processing might be necessary to make the feet fit, depending on your flexible filament's shrinkage.

Tags