Katsu Pocket Hole Jig Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
Edge guide for Katsu Pocket Hole Jig 105412
I bought a cheap pocket hole jig on ebay to give pocket hole joinery a go, it didn't come with any kind of edge spacing guide to I figured that I'd make one.
There is a recess in the top part of the guide to accept a magnet (8mm x 3mm) or a similarly sized peice of metal to attach to the magnet on the top of the jig and hold it all in place.NB if using a magnet make sure to get the polarity correct.
The holes on the lower part are spaced ~5mm apart starting from 0mm (aligned with edge of work piece) and going up to 45mm.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Amazon Basics PLA Violet
Notes:
I used tree style supports as these seemed to work the best.
Category: DIY