Katsu Pocket Hole Jig Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Edge guide for Katsu Pocket Hole Jig 105412 I bought a cheap pocket hole jig on ebay to give pocket hole joinery a go,…
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 61
- Makes
- 0
- Views
- 1,183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Edge guide for Katsu Pocket Hole Jig 105412
I bought a cheap pocket hole jig on ebay to give pocket hole joinery a go, it didn't come with any kind of edge spacing guide to I figured that I'd make one.
There is a recess in the top part of the guide to accept a magnet (8mm x 3mm) or a similarly sized peice of metal to attach to the magnet on the top of the jig and hold it all in place.NB if using a magnet make sure to get the polarity correct.
The holes on the lower part are spaced ~5mm apart starting from 0mm (aligned with edge of work piece) and going up to 45mm.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Amazon Basics PLA Violet
Notes:
I used tree style supports as these seemed to work the best.
Category: DIY