Big Pusher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big push-button that fits most regular soap dispensers and allows you to use them handsfree.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 523
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Big push-button that fits most regular soap dispensers and allows you to use them handsfree.
I wanted to design a push-button that is easily adaptable to fit on all different kinds of regularly available soap dispensers, and allows you to utilize the dispenser with your lower arm or wrist.
The print consists of a base (lower-part) that fits around the thread of the bottle, a push-button (shaft & top) and 3 different types of 'pushers' to accommodate in the different heights and range of travel of the dispensers.
If needed, a zip-tie can be used to secure the base to the bottle.
All part should snap-fit together. You can use some CA-glue if you'd like.
Print instructions
PETG
0.2 Layer height.
10% infill, Gyroid or Grid.
No support needed, except for the wide pusher (top-push-wide.stl) that has a slight concave shape. When printing in PETG I found it useful to change the Support Material --> modify z distance to '0.2 mm'. This makes it easier to remove the support material.