Slim 2x 18650 Case for FPV Goggle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really love the original design by Drip, especially the minimalistic design, but I personally want my 18650s to be…
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 194
- Wydruki
- 0
- Wyświetlenia
- 1425
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I really love the original design by Drip, especially the minimalistic design, but I personally want my 18650s to be protected slightly better. Thanks @Drip, big fan of your channel!
So this is pretty much the same design, just a bit stronger all around.
The idea is to use this with your FPV Goggles. I mainly use NCR18650 cells.
Design Changes:
Stronger walls
Stronger top and bottom cover
Separate top and bottom lid for easier printing
Holes for screw-heads to completely think into part
Thinner holes for better grip of M3 screws
For a full pack you will need:
Printed parts
Two 18650 cells
Four M3 screws with at least 10mm length
Power cable
Balancing cable
Edits:
March 1st 2019: Uploaded new top and bottom STL with bigger holes for the screws and made the top cover thicker for easier printing.
Print instructions
Rafts: No
Supports: Yes
Resolution: 0.15mm layer @ 80mm/s
Infill: --