Beer CO2 Pressure Regulator Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a knob for the CO2 pressure regulators which are common in Europe.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 757
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a knob for the CO2 pressure regulators which are common in Europe. These regulators are often used in homebrew setups where you often have to change the pressure setting on the regulator itself. The original hex-shaped knob is not very handy for changing that quickly.
I know there are other such knobs on Thingyverse already, but I didn't find one that fitted my needs (good feeling when handling and fit on my regulator).
Specifically, I am using this with this regulator: HIWI SK 265-011
The "mm" in the file names is the width of the hexagon, for me the 30mm worked just perfectly. If you need another size, let me know and I can upload that.
Print instructions
Rafts: No
Supports: No
Resolution: 0.15mm layer @ 50mm/s
Infill: 40%