1 / 4
SD Card Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by extrusion calibration test, now my favourite SD card holder. Uses as little material as possible.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Use vase mode. Print on 0.4mm nozzle with 0.2mm layer height to get the right fit. I like making bottom layer with Hilbert curve for a more artistic look.