Strong Keychain Driver Kit (16-in-1 Multitool)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
compact reinforced driver with storage for fourteen 4mm driver bits or six 1/4" driver bits
- Ocena
- 5 / 5
- Polubienia
- 81
- Pobrania
- 794
- Wydruki
- 1
- Wyświetlenia
- 2153
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
parts required 4x 3/16" washer (Ø14mm and 1.2mm height)
Keychain tool with reinforced 1/4" and 4mm hex sockets
Storage for fourteen 4mm driver bits or six 1/4" driver bits (or combination of both).
You can even use the exposed washer as a slotted screwdriver; and the exposed washers on the 1/4" socket as a bottle opener.
If you are lucky enough to have double ended bits, you get 30+ tools in this keychain tool!
Printing Notes
Brim is recommended when printing the cap, as it only a small amount of contact the print bed.
If the driver bit is too loose and falls out, you can scale down the model in x and y direction; or try magnetize the reinforcing washers.
You can check out my other prints at https://www.prusaprinters.org/social/76585-highrise-workshop/prints. And don't forget to click the “Like” button.