Strong Keychain Driver Kit (16-in-1 Multitool)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
compact reinforced driver with storage for fourteen 4mm driver bits or six 1/4" driver bits
- Rating
- 5 / 5
- Likes
- 81
- Downloads
- 794
- Makes
- 1
- Views
- 2,153
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
parts required 4x 3/16" washer (Ø14mm and 1.2mm height)
Keychain tool with reinforced 1/4" and 4mm hex sockets
Storage for fourteen 4mm driver bits or six 1/4" driver bits (or combination of both).
You can even use the exposed washer as a slotted screwdriver; and the exposed washers on the 1/4" socket as a bottle opener.
If you are lucky enough to have double ended bits, you get 30+ tools in this keychain tool!
Printing Notes
Brim is recommended when printing the cap, as it only a small amount of contact the print bed.
If the driver bit is too loose and falls out, you can scale down the model in x and y direction; or try magnetize the reinforcing washers.
You can check out my other prints at https://www.prusaprinters.org/social/76585-highrise-workshop/prints. And don't forget to click the “Like” button.