1 / 3
Westinghouse Fridge WSE6070SB*4 Water Solenoid Adapter — zdjęcie 1
1 / 3

Westinghouse Fridge WSE6070SB*4 Water Solenoid Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The WSE6070SB*4 fridge has a 2 valve water inlet valve. The part is no longer available. Physically, the valve…

Ocena
0 / 5
Polubienia
0
Pobrania
7
Wydruki
0
Wyświetlenia
123
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The WSE6070SB*4 fridge has a 2 valve water inlet valve. The part is no longer available.

Physically, the valve assembly is the same as an LG fridge valve assembly (5200JA2008K)

This bracket screws onto that assembly to mount it in the Westinghouse fridge.

Note that the electrical wires need to be adjusted to fit the plugs in the fridge and you may need a 6mm tube nut with a 10mm thread to attach the water input line to the valve.

This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/h66LXYLbYlC

Print Settings

Printer:

Up Box+

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.2mm

Infill:

Fine

Filament:

Generic PLA


Notes:

Print design laying flat on the print bed with the mounting face (with the two screw holes) facing upwards. In that state, supports are optional.

Category: 3D Printing

Tagi