Westinghouse Fridge WSE6070SB*4 Water Solenoid Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The WSE6070SB*4 fridge has a 2 valve water inlet valve. The part is no longer available. Physically, the valve…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 123
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The WSE6070SB*4 fridge has a 2 valve water inlet valve. The part is no longer available.
Physically, the valve assembly is the same as an LG fridge valve assembly (5200JA2008K)
This bracket screws onto that assembly to mount it in the Westinghouse fridge.
Note that the electrical wires need to be adjusted to fit the plugs in the fridge and you may need a 6mm tube nut with a 10mm thread to attach the water input line to the valve.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/h66LXYLbYlC
Print Settings
Printer:
Up Box+
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2mm
Infill:
Fine
Filament:
Generic PLA
Notes:
Print design laying flat on the print bed with the mounting face (with the two screw holes) facing upwards. In that state, supports are optional.
Category: 3D Printing