1 / 2
Amiga Gotek OLED with rotary encoder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took the oled display case from the original design, make it wider, so the encoder would fit, and also make it 1.5mm…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 643
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I took the oled display case from the original design, make it wider, so the encoder would fit, and also make it 1.5mm taller.
I'm far less precise thenCrazyBob, so I didn't care about spacers, just hotglued the display in, and put the original black panel on while the glue was warm.
The encoder is tall, so I had to cut all of its pin to minimal, as well as the PCB mount tabs and the pin that locks it in position on a front panel.
Source files attached.
Category: Computer