1 / 2
Amiga Gotek OLED with rotary encoder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I took the oled display case from the original design, make it wider, so the encoder would fit, and also make it 1.5mm…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 44
- Makes
- 0
- Views
- 643
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I took the oled display case from the original design, make it wider, so the encoder would fit, and also make it 1.5mm taller.
I'm far less precise thenCrazyBob, so I didn't care about spacers, just hotglued the display in, and put the original black panel on while the glue was warm.
The encoder is tall, so I had to cut all of its pin to minimal, as well as the PCB mount tabs and the pin that locks it in position on a front panel.
Source files attached.
Category: Computer