Protective Face Shield Hyper-Speed Remix - RC3HX 5mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 595
- Wydruki
- 0
- Wyświetlenia
- 1969
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
5mm design update from the previous high-speed remix - RC2X
Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers
Revision 1
• Modified width to be compatible with standard Ender 3
Key difference with RC3
• 5mm total height
• Optimised for speed: about 30 minutes to 1 hr each
• Adapted to fit A4 or A3 sheets, with no changes in dimensions of RC3
• Experimental stacking: tested 20 batches
Files
Stack of 6: estimated print time 5 hours (record: 3 hrs)
Stack of 11: estimated print time 9 hours (record: 6 hrs)
Only print the stack of 11 if your printer is enclosed and highly tuned. Higher risk of delamination 6 and above.
Only print at 0.25mm layer height. Any other layer height will result in a fused solid print.
Print instructions
0.25mm Layer Height
3 Perimeters
No Supports
4mm Brim or 1 Layer Raft