Protective Face Shield Hyper-Speed Remix - RC3HX 5mm
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.14 – €6.29 net (excluding VAT)
For file: a4_5mm_headband_speed_fastest_stack6_025mm_pla_.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.71 excluding VAT (range midpoint).
- Weight reported by the author
- 86 g
- Print time reported by the author
- 5.02 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
5mm design update from the previous high-speed remix - RC2X Currently in use at GP surgeries around Portsmouth, UK and…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 595
- Makes
- 0
- Views
- 1,969
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
5mm design update from the previous high-speed remix - RC2X
Currently in use at GP surgeries around Portsmouth, UK and community keyworkers. We are producing about 100 a day on 4 printers
Revision 1
• Modified width to be compatible with standard Ender 3
Key difference with RC3
• 5mm total height
• Optimised for speed: about 30 minutes to 1 hr each
• Adapted to fit A4 or A3 sheets, with no changes in dimensions of RC3
• Experimental stacking: tested 20 batches
Files
Stack of 6: estimated print time 5 hours (record: 3 hrs)
Stack of 11: estimated print time 9 hours (record: 6 hrs)
Only print the stack of 11 if your printer is enclosed and highly tuned. Higher risk of delamination 6 and above.
Only print at 0.25mm layer height. Any other layer height will result in a fused solid print.
Print instructions
0.25mm Layer Height
3 Perimeters
No Supports
4mm Brim or 1 Layer Raft