Rover platform with 28BYJ motors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have a bunch of 28BYJ stepper motors laying around and wished to make use of them.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I like what Nahuel have done here, but I want to use the 28BYJ stepper motors i have laying around.
The parts i have modified the most are the inner track frame and spindle. I have two versions of the inner track frame. I wish to build it with a different body on top with some clearance underneath but i have also added the regular track frame.
All i have done to the outer and center track frame is to widen some of the holes to 4 mm that now goes straight through to the inner track frame.
I plugged the holes in the cog to decrease the print time (Only decreased with 30 mins but that can add up.)