Rover platform with 28BYJ motors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I have a bunch of 28BYJ stepper motors laying around and wished to make use of them.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 392
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I like what Nahuel have done here, but I want to use the 28BYJ stepper motors i have laying around.
The parts i have modified the most are the inner track frame and spindle. I have two versions of the inner track frame. I wish to build it with a different body on top with some clearance underneath but i have also added the regular track frame.
All i have done to the outer and center track frame is to widen some of the holes to 4 mm that now goes straight through to the inner track frame.
I plugged the holes in the cog to decrease the print time (Only decreased with 30 mins but that can add up.)