1 / 3
iPhone SE Booster Seat for 3rd Gen Toyota Tundra Qi Charger
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spacer to lift small iPhones up so that they register on the Qi charger in the 3rd generation Toyota Tundra
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 1039
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The Qi charger built in to our 2022 Toyota Tundra does not work with my wife's tiny iPhone because the inductive charger is too high. This model is a “booster seat” of sorts that raises the tiny iPhone up so that it will charge.
Print in PETG or some other heat tolerant filament. 0.20u resolution is plenty. Print on its side so that the 45° angle in the middle is pointing down (see Prusaslicer image). No supports or brim necessary. 20% infill seems adequate.