1-3KG Dry Spool Box - Ikea 365 10.6L
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mostly 3D printed Dry Box for 1-3kg spools. Uses an Ikea 365 10.6L container.
- Ocena
- 3,5 / 5
- Polubienia
- 192
- Pobrania
- 690
- Wydruki
- 3
- Wyświetlenia
- 8020
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
Ensuring your filament is dry during printing can greatly improve print quality. This is especially important in humid climates and for more hydroscopic materials like Nylons and TPUs.
We weren't happy with available printed dry boxes and designed our own to accommodate 2x 0.75-1kg spools or a single 2-3kg spool.
A PTFE lined axle provides minimal and consistent rolling resistance.
Air tight internals allow the desiccant module to maintain the <15% relative humidity required for reliable printing of hydroscopic filaments.
An integrated hygrometer monitors humidity levels.
- Qty8 M3 Heat Set inserts
- Qty8 M3x8 Bolts
- Qty2 150mm long 10mm OD Aluminium Tubes
- ThermoPro TP49 Hygrometer
- Qty2 PTFE push fit connectors
- Ikea 365+ 10.6l Container
- Qty4 5mm Dowel Pins ~30mm.
- PTFE Tube