DMC2 CNC Wrench Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holds your collet wrenches on the machine, within easy reach.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 475
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This holds your collet wrenches in one place. I put mine on the right side of the machine with the probes (see also my probe holders)
There are bumps on the top to prevent them from vibrating off and indents on the side to make it easier to grasp them to remove them. I put the larger wrench at the back as shown, it is easier to grasp.
You need some pretty good double sided tape, I use 3m VHB tape. Leave the double sided tape to set for a day before putting your wrenches on it.
Printing:
Print in the orientation provided. I printed in PLA 0.6mm nozzle, 0.2mm lh, 120mm/s speed.