1 / 7
Galaxy watch charging dock for pegboard (hole pitch 25x25) — zdjęcie 1
1 / 7

Galaxy watch charging dock for pegboard (hole pitch 25x25)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Galaxy watch charging mount for pegboards. I'm using the one which came in the box with my GW4.

Ocena
0 / 5
Polubienia
19
Pobrania
43
Wydruki
0
Wyświetlenia
527
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
GNU General Public License v2.0

You Need:
・Galaxy watch USB charging puck
・Super Glue


Peg board specification: 
Hole pitch 25mm*25mm; hole size 5mm; board thickness 5.5mm


1. Print parts A, B and C(4x) with SUPPORT. I recommend Part C(the pegs) to be printed laying flat.

2. Super Glue everything together. When gluing the teeth put glue into the holes so that when the teeth are inserted some glue will come out from the side. If too little then they might break when inserting to the wall.

3. Stick it into the wall, its gonna be a tight fit. If its too tight I advise to take one peg and experiment how well it fits. If it won't fit you could file them a little down or scale it down by 5% or so.

Tagi