Galaxy watch charging dock for pegboard (hole pitch 25x25)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Galaxy watch charging mount for pegboards. I'm using the one which came in the box with my GW4.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 43
- Makes
- 0
- Views
- 527
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v2.0
You Need:
・Galaxy watch USB charging puck
・Super Glue
Peg board specification:
Hole pitch 25mm*25mm; hole size 5mm; board thickness 5.5mm
1. Print parts A, B and C(4x) with SUPPORT. I recommend Part C(the pegs) to be printed laying flat.
2. Super Glue everything together. When gluing the teeth put glue into the holes so that when the teeth are inserted some glue will come out from the side. If too little then they might break when inserting to the wall.
3. Stick it into the wall, its gonna be a tight fit. If its too tight I advise to take one peg and experiment how well it fits. If it won't fit you could file them a little down or scale it down by 5% or so.