1 / 12
Strahd Cosplay Shoulderguards fit to smaller printer — zdjęcie 1
1 / 12

Strahd Cosplay Shoulderguards fit to smaller printer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The original thing has the shoulder guards as one piece and they are too big to fit on the print bed of an Ender 3…

Ocena
0 / 5
Polubienia
19
Pobrania
44
Wydruki
0
Wyświetlenia
386
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The original thing has the shoulder guards as one piece and they are too big to fit on the print bed of an Ender 3 sized printer. I split them in half so they will fit when printed at 100% and added pegs and slots to fit them together. The pegs are a tight fit and may need to be resized if the parts are scaled down. No other changes were made. Modifications were done using Tinkercad.

I printed using Flashforge PLA+ (silver) and it looks great. If you are a perfectionist you may want to fill-sand-prime-paint but I`m just going to use them as is. I used a 0.2 layer height and 10% infill and it takes 24-29 hours to print one part.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Yes

Supports:

Yes

Resolution:

.2

Infill:

10%

Filament: Flashforge PLA+ Silver


Notes:

20mm wide raft and custom support blocks at the corners just to be sure it doesn`t tip over. Used tree supports

Category: Costume

Tagi