Strahd Cosplay Shoulderguards fit to smaller printer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The original thing has the shoulder guards as one piece and they are too big to fit on the print bed of an Ender 3…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 44
- Makes
- 0
- Views
- 386
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution
The original thing has the shoulder guards as one piece and they are too big to fit on the print bed of an Ender 3 sized printer. I split them in half so they will fit when printed at 100% and added pegs and slots to fit them together. The pegs are a tight fit and may need to be resized if the parts are scaled down. No other changes were made. Modifications were done using Tinkercad.
I printed using Flashforge PLA+ (silver) and it looks great. If you are a perfectionist you may want to fill-sand-prime-paint but I`m just going to use them as is. I used a 0.2 layer height and 10% infill and it takes 24-29 hours to print one part.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Resolution:
.2
Infill:
10%
Filament: Flashforge PLA+ Silver
Notes:
20mm wide raft and custom support blocks at the corners just to be sure it doesn`t tip over. Used tree supports
Category: Costume