Xiaomi Mi Scooter 1S, 2 PRO, 3 - Wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Xiaomi Mi Scooters. Use specific STL for your version!Tested for 10 months without any issue.
- Ocena
- 5 / 5
- Polubienia
- 141
- Pobrania
- 698
- Wydruki
- 5
- Wyświetlenia
- 5603
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In tested scenario scooter stands on front tire. Short-term testing proved it's able to hold scooter lifted. Printed in PETG with 60% infill, 0.2mm layer height.
Compatible with:
Mi Scooter 1S
Mi Scooter 2 Pro
Mi Scooter 3
M365 Pro (use Mi Scooter 1S model) - confirmed thanks to Troyhowarth
Not compatible with:
Mi Scooter 4 Pro
Please let me know about compatibility with M365/Eseential etc. Main difference might be in lower deck width (104.6mm Mi Pro 2, 94.4mm for Mi3 and 1S).
Warning! Put some insulation (plastic/vinyl sticker) under tyres. Chemical reaction caused by tyres might cause yellowing.
Update 11/2022:
Added split model made by Troyhowarth. No supports required and strenght should be increased allowing to lift scooter from ground. Check the comments section.